|
多晶硅多功能18000電池筆記本太陽能充電器
功能簡介
本產品是一款多功能筆記本太陽能充電器,內置高品質鋰聚合物電池組,可隨時對筆記本電腦/手機/數碼相機/攝像機/PDA/MP3/MP4/MINI音箱等數碼產品及週邊產品進行充電,在長期無陽光的情況下，也可以用市電給內置鋰電池充電,，適用於出差、旅遊、長途乘車船、野外作業等環境的備用電源。外型酷似筆記本電腦,造型華貴大方,小巧玲瓏,攜帶方便,時尚高雅.
技術參數：
1、充電器產品外形尺寸：260mm x 200mm x 33mm
2、太陽能電池板規格：(233mm×168mm×4m)-2片
3、太陽能功率 ：10W（優質多晶硅）
4、太陽能轉換效率高達16%以上；
5、輸 入電 壓：DC12V-20V
6、輸 出 電 壓：DC 6V/8.4V/9V12V/16V/19V/24V ,
7、最大輸出電流：視產品型號而定,最大7A電流
8、USB輸 出DC: 5V
9、USB5V輸出電流: 2A
10、內置聚合物高容量可充鋰電池組容量：18000Ma/H
附件
1、太陽能充電器： 一部
2、充電連線：3條
3、配套轉接頭：10個+8個=18個
4、包裝彩盒： 一個
I、Product overview
The portable laptop solar power station with high quality Li-polymer battery pack, it suits for laptop/mobile phone/digital camera/ PDA/MP3/MP4/GPS and more digital device, the inner cell also could store the power by the mains supply while without the sun＇s rays，so it is used for business, journey, field work as a spare power, the stately and smart design is very attract, laptop shape, easy to carry, economical and practical.
II、Conformation
|
FUNCTION KEYS AND LED INDICATE
|
III、Specification
1、Product size：260mm x 200mm x 33mm
2、Cell size：(233mm×168mm×4mm)-2 Cells
3、Solar Power ：10W（high quality poly-silicon）
4、Solar turnover rate up to 16%
5、Input：DC12V-20V
6、Output：DC 6V/8.4V/9V/12V/16V/19V/24V,
7、Max output current：（refer enclosed list）
8、USB output :DC5V
9、USB current output: 2A
10、Inner high capacity Li-polymer cell pack:（refer enclosed）；
IV、Use guide
1、Power on
Press ‘KEY” and LED indication,it shows the battery current capacity .the
tolerant voltage is DC6V
2、Power off
Press“KEY” after six seconds, the LED put out and the power off.
3、capacity indication
Press“KEY” about 0.5 seconds,shows the capacity percentage by the line
width,it could reference the capacity of the battery.
4、voltage switch
A、Press KEY per 2 seconds turned one work voltage,
and you could continuously choose the suited voltage between DC6V、DC8.4V、9V、12V、16V、19V、24V
B、Choose the proper voltage according to your device,and then connect equal plug and cable to your device ,and connect the cable to the counterpart power station jack,the LED will indicate when working.
C、the will be locked while charging ,this make sure the voltage could not
be changed because of fault operation,that could protect the device.
D、meanwhile you also could charge for your mobile phone or other device with the USB (DC 5V) output.
V、Maintenance
1、in order to insure the perfect work,you need to charge the battery saturated by the mains supply at first time.
2、If the power station is shelved and untapped out of three month,you’d better to charge the inner battey to 80%（that is till the sixth LED get light）.
3、Charge:
A、Mains supply；
The time of finished charge is 4-6 hrs with adaptor(DC12V-20V),the LED will circulate to scheduled indication(till all of the LED get light),
B、Solar supply；
The time of finished charge is 12-20 hrs with the solar（depend on the light strength）the “Solar Charger” LED gets light.
VI、Advantage
1. fancy design,Touch switch capacity/voltage,voltage simulation and power status indication.
2. intellect protective IC,achieve protection of over charge,over release,over loading and short circuit.
3. different adaptor available,suits for most of mobile phone,MP3,MP4,PDA,GPS,digital camera and laptop.
VII、Accessories
1、Solar adaptor: 1 pc
2、cable：3 pcs
3、10 pcs+8 pcs=16 pcs
4、Colour box package
VIII、Optional equipment
1、DC 16V adaptor
2、AC cable
3、Laptop solar power station special bag
IX、Enclosed（model and standard）
|
Model
|
Capacity（mA/h）
|
Max output current（A）
|
|
XQSC1203A
|
12000
|
3．75
|
|
XQSC1204A
|
12000
|
4．5
|
|
XQSC1803A
|
18000
|
3．75
|
|
XQSC1804A
|
18000
|
4．5
|
|
XQSC2205A
|
24000
|
5．4
|
|
XQSC2207A
|
24000
|
7．0
|
Remark：this specification and appearance just for your reference, it is to be noted that all these information are subject to change without notice，Pardon the Inconvenience！
|
|
|
|
| 選擇圖片 |
 |
|
|
|
|
